Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateAmarr Weather Seal Replacement: The Alpharetta Owner’s Guide
Amarr weather seal replacement in Alpharetta typically runs $90 – $180 installed, and most swaps take under an hour once we’re at the door. We stock Amarr-compatible bottom seals and threshold strips on the truck, so a failed seal is usually fixed same day, not scheduled out for parts. Homeowners most often discover the problem as a line of daylight under the closed door, a damp floor after rain, or leaves collecting in the corner nearest the garage interior.
What you’re replacing is the rubber or vinyl strip that runs along the bottom edge of the door (or along the door jamb and header for perimeter seals). On Amarr doors, that strip takes a beating in Georgia humidity. It dries, cracks, flattens, and stops hugging the slab. Once that happens, water follows the slope of your driveway and finds the gap. We see it in Kimball Bridge, Windward, Crabapple, and down toward the Avalon area, especially on west-facing doors where afternoon sun bakes the rubber.
Which Amarr Models This Applies To
This covers the full Amarr residential lineup we service in Alpharetta: the Lincoln, Stratford, Heritage, Classica, and Olympus series, along with newer steel-builder models installed in Avalon-area and Halcyon-area construction. The seal itself isn’t model-specific in the way a panel or hinge is. What matters is the retainer channel: Amarr doors built after roughly 2010 commonly use a T-style or U-channel bottom retainer, while older Amarr doors may have a screw-on aluminum retainer that takes a flat, slide-in strip.
That’s the compatibility gotcha. If you grab a generic big-box seal and your Amarr uses a T-channel retainer, the new strip won’t seat correctly and will pull loose within weeks. We match by physical measurement and retainer shape, not by box label. As for OEM versus aftermarket: Amarr’s factory 4-inch bulb seal is good material, but quality aftermarket EPDM rubber from a supplier we’ve vetted often outlasts the OEM vinyl in Georgia heat. We’ll tell you plainly which one makes sense for your door and your budget, and our written price before any work starts covers either choice.
Styles & brands we work with






Signs Your Amarr Weather Seal Replacement Is Failing
- Visible daylight under the closed door. The bulb seal has flattened beyond recovery. Once rubber loses its compression memory, it can’t spring back, and no adjustment to the travel limits fixes it.
- Water on the garage floor after rain. Alpharetta storms blow water sideways. A seal that’s cracked at the corners or split along the bottom lets runoff follow the slab edge straight inside.
- Drafts and higher utility bills. A garage that stays hot in July and cold in January is leaking conditioned air. The biggest leak point is almost always the bottom seal.
- Leaves, dirt, and millipedes. Georgia millipedes love the moist gap under a failing garage seal. If you’re sweeping up insects and leaf litter inside, the seal isn’t sealing.
- Visible cracks, splitting, or a crumbling edge. Vinyl seals degrade in Atlanta-area UV. Run a finger along the bottom edge. If it flakes off, it’s done.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Alpharetta, expect $90 – $180 for Amarr weather seal replacement, part and labor included. Where a job lands in that range depends on the retainer style, the door width, and whether we’re replacing just the bottom seal or the sides and header too. A standard 16-foot double door with a T-channel retainer sits at the lower end. A wider custom door or one that needs the old aluminum retainer replaced moves toward the upper end.
Every visit starts with the written price before any work begins. That number covers the seal material, removal of the old strip, cleaning the retainer channel, installing and seating the new seal, and a test close to confirm the gap is gone. The work is covered by our 365-Day Done Right Promise. If the seal pulls loose or still leaks within a year, we fix it without another invoice.
Key Takeaways
- Amarr weather seal replacement in Alpharetta: $90 – $180 installed
- Same-day service is usually available since we keep seals stocked on the truck
- Compatibility is about retainer channel type, not just door brand
- Written quote before work starts, every visit, no exceptions
- 365-Day Done Right Promise covers the replacement
DIY or Call Us?
Weather seal replacement doesn’t carry the same danger as springs or cables, so a patient homeowner can slide a new strip into a T-channel retainer. What goes wrong is the fit. An aftermarket seal that’s slightly too narrow leaks just like the old one. A retainer screw stripped by uneven torque becomes a bigger job. And a seal installed without checking the door’s travel limits can bind on the first close and tear.
If you tell us you’ve tried it and the seal still shows daylight, we won’t lecture. We’ll check the retainer, the door balance, and the slab level before installing the replacement. A garage floor in Alpharetta that has settled a quarter inch at the corner will defeat a new seal unless we address it. Call (229) 471-5755 and we’ll give you an honest read over the phone first.
FAQs
On average, five to eight years in Alpharetta’s heat and humidity, less if the door faces full afternoon sun or the garage floor has settled unevenly. We see seals from newer Avalon-area builds fail sooner when the concrete slab wasn’t fully cured before the door was installed.
If yours is flaking, splitting, or showing daylight, call (229) 471-5755 for a quote; estimates are free.
Not reliably. Small gaps at the corners can sometimes be filled, but a patch fails within months because the surrounding rubber is already compromised. Replacing the full strip is the only fix that restores a consistent seal across the door’s width.
Call (229) 471-5755 and we’ll tell you honestly if a repair is even worth considering for your specific door.
Most Amarr weather seal replacements take 30 to 60 minutes once we arrive, including removing the old strip, cleaning the retainer, installing the new seal, and testing the door through a full close cycle. We bring the shoe covers and drop cloths inside if we need to access the door from the garage interior, and you’ll get a photo of the clean-up before we leave.
Yes. Our trucks carry Amarr-compatible bottom seals in common widths and retainer styles, plus side and header seals for perimeter replacement. We also stock parts for LiftMaster, Chamberlain, and Genie opener systems when a seal job turns up an opener issue. If your door needs a less common size, we order it and schedule the return visit before we leave, with no second service charge.
Call (229) 471-5755 to confirm same-day availability for your Alpharetta address.
If the daylight under your Amarr door is letting in more than light, we’re ready to fix it. Call (229) 471-5755 and a live person will answer, day or night. You’ll get a written price before any work begins, a technician in uniform who asks before moving anything in your garage, and a door that closes quietly every time. That’s the standard, not the upsell.
Written by Jesse Calder, Owner, Fernbrook Garage Doors Alpharetta at Fernbrook Garage Doors Alpharetta, serving Alpharetta and nearby areas.