Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateCraftsman Weather Seal Replacement: The Alpharetta Owner’s Guide
We stock and install Craftsman-compatible weather seal replacement in Alpharetta, and most swaps run between $120 and $240 installed, including the part and labor. Same-day service is available when we have your seal profile on the truck, which we usually do for the common Craftsman widths. You’ll typically notice this part has failed when you see daylight under the door, find leaves and grit blown onto the garage floor after a storm, or feel a draft when you stand near the bottom of a closed door during an Alpharetta cold snap.
Which Craftsman Models This Applies To
Craftsman garage doors use a bottom seal that slides into a T-shaped or P-shaped retainer channel along the bottom panel. Since Craftsman was sold through Sears for decades, the doors came from several manufacturers, and the seal profile varies by door series rather than by the Craftsman badge itself. We check the retainer channel shape and the door thickness before matching a seal, because putting a P-profile bulb into a T-channel creates gaps that the seal can’t close. Most Alpharetta homes with Craftsman doors built after 2005 use a 3-3/4 inch or 4-inch bulb seal, but we’ve seen enough 2-1/2 inch T-channels on older door models that we measure every time rather than guess. We carry genuine Craftsman-spec seals and quality aftermarket equivalents that match the dimensions, and we’re clear about which is which before any work begins.
Styles & brands we work with






Signs Your Craftsman Weather Seal Replacement Is Failing
- Visible daylight or gaps under the door. The rubber bulb has compressed or cracked and no longer reaches the floor evenly. In Alpharetta, this shows up most clearly after heavy rain, when the floor shifts slightly with moisture.
- Leaves, pine straw, and dirt blown inside. The seal gap acts like a funnel on windy days, and the debris that collects against the back of the door is a direct sign the seal is torn or detached at one corner.
- Draft or temperature shift at the floor line. If the garage feels colder than the house in January or warmer in August, the seal is often the first point of failure. Weather seal replacement on a Craftsman door is the least expensive fix we can do for that kind of comfort loss.
- Water stained floor or damp boxes near the door. Alpharetta’s summer storms can push water under a failing seal. The seal itself gets brittle faster in the Southeast heat, and a crack lets water through even when the bulb shape still looks intact.
- Pest droppings or evidence of mice along the base. A broken seal leaves a gap big enough for small rodents. This is the symptom that tends to push the repair to the top of the list.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Craftsman weather seal replacement in Alpharetta typically runs $120 to $240 installed. The spread comes down to door width, seal profile, and whether the retainer channel itself is bent or corroded and needs attention. We quote the part and labor separately so you can see what you’re paying for, and the price is written down and agreed before anything gets unbolted. The seal we install is pet-safe and doesn’t off-gas after installation, which matters if your dog sleeps in the garage or the kids play out there. Our 365-Day Done Right Promise covers the installation; if the seal shifts, snags, or isn’t seating right, we come back and make it right at no charge.
DIY or Call Us?
Weather seal replacement on a Craftsman door is one of the few repair jobs where a determined homeowner can do the work safely, since it involves no high-tension springs or cables. The seal pulls out of the retainer channel and slides back in. What goes wrong in practice is the door itself: if the bottom panel is wedged against the floor, or the door isn’t level, a new seal won’t sit evenly and you’ll spend a Saturday fighting a rubber extrusion that keeps kinking. We also see owners order the wrong bulb profile online and try to force it into a channel it was never meant to fit. If you’d rather have it measured, matched, and done, call (229) 471-5755 and we’ll quote it over the phone.
FAQs
Expect five to eight years in the Alpharetta climate, give or take. The combination of summer heat, humidity, and winter cold cycles causes the rubber to stiffen and crack from the ends first. Garages that face full afternoon sun lose seals faster. Call (229) 471-5755 if yours has cracked or compressed, and we’ll confirm the condition before you pay for anything.
No, not in a way that works. Once the rubber bulb has cracks or the T-shaped anchor has torn, patching doesn’t hold. Replacement costs the same as a repair attempt would, and the new seal lasts years longer. We’ll show you the old seal when it comes out so you can see exactly why it failed.
Most Craftsman weather seal replacements take under an hour, including measuring, swapping the seal, testing the door, and cleaning up. We carry the common profiles on the truck, so a same-day appointment in Alpharetta is usually possible. If your retainer channel is damaged, we’ll quote the extra work before starting.
We carry the most common Craftsman-compatible seal profiles and sizes on our service vehicles serving Alpharetta, along with weather seal stock for LiftMaster, Chamberlain, and Genie opener accessories when a garage system needs more than one part. If your door uses an unusual profile we don’t have on board, we order it and schedule the install for the next available day.
Written by Jesse Calder, Owner, Fernbrook Garage Doors Alpharetta at Fernbrook Garage Doors Alpharetta, serving Alpharetta and nearby areas.